Advanced technology
MULTIline PRO 5.5 mm
Hose liner for the trenchless inner lining of defective, leaking and statically impaired pipes.
The heaviest-walled PRO, built on an 800 g/m² textile — the greatest structural reserve where the host pipe is badly degraded.
- DN 70 – 300
- 5.50 mm wall
- 800 g/m² textile
Technical data
| Product code | PRO |
|---|---|
| Length | 50 m; 100 m / 164 ft; 328 ft |
| Diameter | 70, 80, 100, 125, 150, 200, 225, 250, 300 |
| Wall thickness | 5.50 mm / 0.22 inch |
| Liner undersized | 13 % |
| Heat resistance | Max. 70 °C / 158 °F |
| Negotiating bends | Max. 90° |
| Material | Multi-knitted fleece with one-sided TPU coating |
| Textile | Polyester, 800* g/m² |
| Coating | One side TPU, 150* g/m² |
| Colour / coating | White / Transparent |
| Water penetration | ≤ 600 mbar / ≤ 8.70 psi |
| Storage | Protected from light, dry |
Values marked * are nominal. Always confirm against the current data sheet.
Need this for a project?
Tell us the diameter, length and application and our technical team will confirm the right liner and resin combination.